Circuit/System Verification
- Inspect the rearview camera and verify there is no debris on the lens and that the bezel or bezel seal is not damaged.
- If debris is found on the lens, clean the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
- Engine running, vehicle in PARK, verify the backup lamps are off.
- If the backup lamps are illuminated, refer to Rearview Camera System Always On.
- Vehicle is REVERSE, engine running, verify backup lamps are on.
- Vehicle in REVERSE, engine running, verify a clear rear vision image is displayed on the radio.
- If a clear image is not displayed, refer to Rearview Camera System Does Not Display.