Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the DTC B101D is not set.
- If the DTC is set
- Replace the B218L Side Object Sensor Module - Left.
- Verify no new DTCs set and the side blind zone alert operates properly.
- If any DTCs are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle , or if the system does not operate properly, refer to Side Object System Malfunction .
- If there are no new DTCs and the side object system operates properly
- All OK.
- If the DTC is not set
- All OK