Installation Procedure
Courtesy of GENERAL MOTORS COMPANY
- Assemble the Front Floor Console Accessory Bracket (2) to the Wireless Charging System Module (3).
- Install and tighten Front Floor Console Bracket Bolt (1) (Qty: 4) to 1 N.m (9 lb in)
Courtesy of GENERAL MOTORS COMPANY
- Connect the Front Floor Console Housing Assembly (1) to the Radio Cooling Duct (2).
- Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY
- Install and tighten Front Floor Console Bracket Bolt (1) (Qty: 4) to 2.5 N.m (22 lb in)
- Install Front Floor Rear Console Side Trim Panel - Right Side. Refer to Front Floor Rear Console Side Trim Panel Replacement - Right Side
- Install Front Floor Rear Console Side Trim Panel - Left Side. Refer to Front Floor Rear Console Side Trim Panel Replacement - Left Side