Circuit/System Verification
- Ignition ON.
- Verify DTC B395B 4B is not set.
- If the DTC is set
- Program the K157 Video Processing Control Module.
- Verify DTC B395B 4B is not set after programming.
- If the DTC sets after programming, replace the B225L Sideview Camera - Left.
- If the DTC does not set
- All OK.
- If the DTC is not set
- Verify DTC B395B 66 is not set.
- If the DTC is set
Remove the B225L Sideview Camera - Left and reinstall
- If the DTC is not set
- If the DTC is set
- Verify DTC B395B 08 is not set.
- If DTC is set
Refer to Circuit/System Testing
- If DTC is not set
- If DTC is set
- Vehicle ON, transmission in R, verify a clear image is displayed on the P17 Info Display Module.
- If a clear image is not displayed
Refer to Circuit/System Testing
- If a clear image is displayed
- If a clear image is not displayed
- All OK.