Side Object Sensing Alert Module Replacement

Fig 1: Side Object Sensing Alert Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Rear Bumper Fascia Energy Absorber. Refer to Rear Bumper Fascia Energy Absorber Replacement .
1	Side Object Sensing Alert Module Procedure Disconnect the electrical connector. Release the tab retainers and slide the module up and out of the retaining bracket. Refer to Control Module References for programming and setup information, if required.

Callout

Component Name

Preliminary Procedure
Remove Rear Bumper Fascia Energy Absorber. Refer to Rear Bumper Fascia Energy Absorber Replacement .

Side Object Sensing Alert Module

Procedure

Disconnect the electrical connector.
Release the tab retainers and slide the module up and out of the retaining bracket.
Refer to Control Module References for programming and setup information, if required.