Circuit/System Testing
Circuit/System Testing
- Ignition OFF, disconnect the harness connector at the X92 USB Receptacle and connect the EL-50334 - 4 USB Type A Female to Mini B Female Adapter to the harness connector, then connect the El-50334 - 20 Multi-Media Interface Tester (MIT) and select the USB test mode, ignition ON.
- Verify the audio from the EL-50334-20
Multi-Media Interface Tester (MIT) is heard through the infotainment system while operating the system to play audio from the test tool.
- If audio is heard from the test tool
Replace the X92 USB Receptacle
- Go to next step: If audio is not heard from the test tool
- If audio is heard from the test tool
- Ignition OFF, Disconnect USB Interface Harness from A11 Radio and connect EL-50334 - 2 Type A Female to Mini B Male USB Test Cable to A11 Radio, then connect the EL-50334-20 Multi-Media Interface Tester (MIT) and select the USB test mode, ignition ON.
- Verify the audio from the EL-50334-20
Multi-Media Interface Tester (MIT) is heard through the infotainment system while operating the system to play audio from the test tool.
- If audio is heard from the test tool
Replace the USB interface harness between A11 Radio and X92 USB receptacle
- Go to next step: If audio is not heard from the test tool
Replace the A11 Radio
- If audio is heard from the test tool
- All OK.