LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> City Express LS >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> Key With Integrated Transmitter Programming >> Programming Using SPS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Using SPS

NOTE:

This procedure should performed if the BCM has been replaced. The manual procedure without using SPS will not work if the BCM is new.

NOTE:

This is the preferred procedure for programming keys.

  1. Connect a scan tool to the vehicle and access SPS.
  2. Vehicle in Service Mode, engine OFF.
  3. Ensure that all power consuming devices are turned OFF on the vehicle.
  4. Select SPS application and follow the on-screen instructions.
  5. Select BCM.
  6. Select Transmitter (Key Fob) Learn.
  7. Follow the on-screen instructions.
  8. After programming all keys the vehicle hazard warning lamps and indicators will flash.
  9. Verify each key is operating properly. Operate each of the keyless entry functions using the buttons on the transmitter and then start the vehicle. When verifying operation, make sure that no other keys are near the vehicle.
scientia non olet · About LEMON Manuals