Video Processing Module Replacement

Fig 1: Video Processing Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Rear Compartment Floor Panel Trim Replacement (North America)Rear Compartment Floor Panel Trim Replacement (Export - CU9, CV5, CZ3, C4E)
1	Video Processing Module Nut (Qty: 3) CAUTION: Fastener Caution Procedure Remove wire harness retainer push clip from bracket. Tighten 9 N.m (80 lb in)
2	Video Processing Module Procedure Disconnect the electrical connectors. Perform the necessary programming and setup procedure:Control Module References

Callout

Component Name

Video Processing Module Nut (Qty: 3)

CAUTION:

Procedure
Remove wire harness retainer push clip from bracket.
Tighten
9 N.m (80 lb in)

Video Processing Module

Procedure