Circuit/System Verification
- Ignition ON/Vehicle in Service Mode.
- Verify that no other DTCs are set.
- If any other DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no other DTCs are set
- If any other DTCs are set
- Verify that DTC P163A is not set.
- If the DTC is set
Refer to Circuit/System Testing.
- If the DTC is not set
- If the DTC is set
- Operate the vehicle within the Conditions for Running the DTC. It may be helpful to operate the vehicle within the conditions identified from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC sets
- All OK.