Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Vehicle ON.
- Verify DTC P0606 is not set.
- If the DTC is set
Refer to DTC P0601-P0604, P0606, P062F, P1EB6 or P1EB7 (Hybrid/EV Powertrain Control Module 1) .
- If the DTC is not set
- If the DTC is set
- Verify DTC P06AF is not set.
- If the DTC is set
- Program the T6 Power Inverter Module.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets, continue to Circuit/System Testing.
- If the DTC does not set.
- All OK.
- If the DTC is not set
- All OK.