Fastener Specifications
WARNING: This page is about a different variant/trim than selected.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Retaining Ring |
| Transmission Fluid Cooler Pipe Seal |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Transmission Fluid Cooler Bolt | 5 N.m (44 lb in) |
| Transmission Fluid Cooler Pipe Retaining Bolt | 22 N.m (16 lb ft) |
| Transmission Fluid Cooler Pipe Retaining Nut | 17 N.m (13 lb ft) |
| Transmission Fluid Auxiliary Cooler Thermal Bypass Valve Fastener | 5 N.m (44 lb in) |
| Transmission Fluid Auxiliary Cooler Upper Bracket Fastener | 5 N.m (44 lb in) |
| Transmission Fluid Auxiliary Cooler Upper Bracket to Transmission Fluid Cooler Fastener | 5 N.m (44 lb in) |
| Transmission Fluid Cooler Pipe Bracket Nut | 17 N.m (13 lb ft) |