Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Pressure Plate to Flywheel Retaining Bolt | |
|
15 N.m (11 lb ft) |
|
35 N.m (26 lb ft) |
|
55 N.m (41 lb ft) |
|
70 N.m (52 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Clutch Fluid Reservoir Bracket to Brake Master Cylinder End Brace Retaining Bolt | 17 N.m (13 lb ft) |
| Clutch Fluid Reservoir to Clutch Master Cylinder Bracket Retaining Nut | 10 N.m (89 lb in) |
| Clutch Master Cylinder to Clutch Pedal Retaining Bolt | 12 N.m (106 lb in) |
| Clutch Pedal Assembly to Instrument Panel Crossmember Upper Retaining Bolt | 25 N.m (18 lb ft) |
| Clutch Pedal Assembly to Mod Plate Retaining Nut | 22 N.m (16 lb ft) |
| Clutch Pedal Position Sensor to Clutch Pedal Assembly Retaining Bolt | 13 N.m (115 lb in) |
| Concentric Actuator Cylinder Bleed Screw | 8 N.m (71 lb in) |
| Concentric Actuator Cylinder to Transmission Retaining Bolt | 10 N.m (89 lb in) |