LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Repair Instructions >> Front Parking Assist Alarm Sensor Replacement (Center) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    NOTE:

    Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative.

  1. Paint the front object alarm sensor. Refer to Basecoat/Clearcoat Paint Systems .
  2. Ensure the paint does not exceed 6 mils. Use a paint thickness gauge suitable for non-ferrous metals. Refer to Paint Gauges .
    3. Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  3. Insert the sensor into the housing.
  4. Connect the electrical connector to the front object alarm sensor.
scientia non olet · About LEMON Manuals