LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Sonic Premier, 4D Sedan, Standard Trans >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup (6T30/6T40/6T45/6T50) >> Programming an Existing or New Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming an Existing or New Control Module

To program an existing or new control module, perform the following procedure:

  1. Install the special tool: EL-49642  SPS Programming Support Tool
  2. Ignition - On / Vehicle - In Service Mode
  3. Access SPS and follow the on-screen instructions for the control module: Q8 Control Solenoid Valve Assembly or K71 Transmission Control Module
  4. Perform the following learn procedure: Transmission Adaptive Values Learn
scientia non olet · About LEMON Manuals