LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Spark LT, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the battery. Refer to Battery Replacement .
  3. Disconnect the body harness connector (1) from the battery current sensor (2).
    Fig 1: Body Harness Connector And Battery Current Sensor
    GM4009328Courtesy of GENERAL MOTORS COMPANY
  4. Remove the battery negative and positive cable ground nut (3) and the battery negative cable from the frame rail.
  5. Remove the battery current sensor (2) from the battery negative cable (1).
    Fig 2: Battery Current Sensor And Battery Negative Cable
    GM4009329Courtesy of GENERAL MOTORS COMPANY
    NOTE: Note the orientation of the battery current sensor when removing.
scientia non olet · About LEMON Manuals