Circuit/System Verification
- Ignition ON.
- Verify the scan tool Driver Door Lock Sw. parameter changes from Inactive to Active when pushing the appropriate switch on the S13D Door Lock Switch-Driver.
- If the parameter does not change
Refer to Circuit/System Testing - Driver Door Lock Switch Malfunction.
- If the parameter changes
- If the parameter does not change
- Verify the scan tool Driver Door Unlock Sw. parameter changes from Inactive to Active when pushing the appropriate switch on the S13D Door Lock Switch-Driver.
- If the parameter does not change
Refer to Circuit/System Testing - Driver Door Lock Switch Malfunction.
- If the parameter changes
- If the parameter does not change
- Verify the scan tool Psgr. Door Lock Sw. parameter changes from Inactive to Active when pushing the appropriate switch on the S13P Door Lock Switch-Passenger.
- If the parameter does not change
Refer to Circuit/System Testing - Passenger Door Lock Switch Malfunction.
- If the parameter changes
- If the parameter does not change
- Verify the scan tool Psgr. Door Unlock Sw. parameter changes from Inactive to Active when pushing the appropriate switch on the S13P Door Lock Switch-Passenger.
- If the parameter does not change
Refer to Circuit/System Testing - Passenger Door Lock Switch Malfunction.
- If the parameter changes
- If the parameter does not change
- All OK.