LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse Premier, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Diagnostic Information and Procedures >> DTC B3031: Security System Controller In Learn Mode >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

IMPORTANT:

When performing the 10-Minute Vehicle Key Relearn Procedure, all keys not learned at that time will be erased and not be recognized. Perform the Adding Keys procedure on all keys or instruct the customer how to perform the Adding Keys procedure should all keys not be present at the time of repair.

  1. Verify DTC B3055 is not set.
  2. Verify the scan tool Immobilizer data displays two or more keys learned to the vehicle.
    • If not, then add one additional key.
  3. Verify the scan tool TDM Learn Coded Key parameter displays Yes.
  4. Perform the 10 Minute Vehicle Key Relearn procedure. Refer to Replacing Keys (North America except Canada) Replacing Keys (Canada) . The TDM should exit the learn coded key state and DTC B3031 should clear.
    • If the TDM does not exit the learn coded key state after the programming attempt, replace the TDM.
scientia non olet · About LEMON Manuals