LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse Premier, FWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 3.6L (LLT) - DTC P0340 To DTC P2635 And Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC P0601-P0604, P0606, P062B, P062F, P0630, P16F3, or P262B (ECM): Control Module >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON, clear the DTC information with a scan tool.
  2. Verify no other DTCs are set.
    • If no other DTCs are set 
  3. Observe the DTC information with a scan tool. Verify DTC P0602 or P0630 is not set.
    • If any of the DTCs are set 
    1. Program the K20 Engine Control Module. Refer to Control Module References .
    2. Verify DTC P0602 or P0630 is not set.
      • If any of the DTCs are set, replace the K20 Engine Control Module.
      • If none of the DTCs are set
    3. All OK.
    • If none of the DTCs are set 
  4. Verify DTC P0601, P0603, P0604, P0606, P062B, P062F, P16F3, or P262B is not set.
    • If any of the DTCs are set 

      Replace the K20 Engine Control Module.

    • If none of the DTCs are set 
  5. All OK.