Theft Deterrent Module Scan Tool Information

Theft Deterrent Module Scan Tool Data Parameters

Parameter	Expected Value	Definition
Operating Conditions: Ignition ON
Auto Learn Counter	Varies	This displays Counts. This is the number of times the auto learn procedure was carried out by the TDM.
Auto. Learn Timer	Varies	This displays minutes. This is the amount of minutes the TDM took to auto learn.
Battery Reconnect	No	The scan tool displays Yes or No. Yes is displayed if the battery was recently reconnected.
Fleet Vehicle	No	The scan tool displays Yes or No. Yes is displayed if the vehicle is a fleet vehicle.
Fuel Continue	No	The scan tool displays Yes or No.
Fuel Disable Ignition Off	Yes	The scan tool displays Yes or No. Yes is displayed if the fuel is disabled during ignition OFF.
Fuel Disable Timeout	No	The scan tool displays Yes or No. Yes is displayed if the fuel disable timed out.
Ignition Voltage Signal	Present	The scan tool displays Present or Not Present. Present is displayed if there is an ignition voltage signal to the TDM.
Immobilization	Inactive	The scan tool displays Active or Inactive. This is the state of the immobilizer system.
Immobilizer Programmed	Yes	The scan tool displays Yes or No. This is the state of the immobilizer system programming.
Incorrect VIN 1	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Incorrect VIN 2	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Incorrect VIN 3	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Incorrect VIN 4	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Incorrect VIN 5	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Incorrect VIN 6	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Incorrect VIN 7	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Incorrect VIN 8	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Incorrect VIN 9	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Incorrect VIN 10	No Error	The scan tool displays Unknown, No Error, ECM/PCM, TCM, EBCM, DSCC, TBCM, ESCM, ASCM, BCM, BCM Aux., SDM, PPS, ROS, PIDM, IPC, DIC, HUD, Chime, Radio, Amp., CDX, RSA, DRR, Onstar, HVAC, RCC, DDM, PDM, LRDM, RRDM, LGM, PSDM, MSM, HVSM, RCDLR, SOD, TDM or SCLM. The module displayed has an incorrect VIN programmed into that module.
Learn Coded Key	No	The scan tool displays Yes or No.
Master Keys Learned	Varies	This displays Counts. This is the number of master keys learned by the TDM.
PCM Authentication Status	Valid	The scan tool displays Unknown, Incorrect, Negative or Valid. This is the state of the PCM authentication.
PCM Auto. Learn Timer	Inactive	The scan tool displays Active or Inactive. This is the current state of the ECM auto learn timer.
PCM Password Learning	Enabled	The scan tool displays Enabled or Disabled. This is the state of the password learning in the ECM.
PCM Release Status	Release	The scan tool displays Unknown, Post Release, Pre-Release or Release. This is the release status of the ECM.
Power Mode	Run	The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch.
Powertrain DTC	No	The scan tool displays Yes or No. Yes is displayed if there is a powertrain DTC stored in the ECM or TCM.
Previous TDM State	Varies	The scan tool displays Asleep, Wakeup, Normal, Learn Passkey, Tamper, Monitor Key, Fail Pending, Fail Enabled, Lrn Keys Stdby, Learn More Keys, Learn Pending, Auto Learn, Auto. Lrn. Done, No Coded Key, Check Second Key, VIN Check, OnStar, Bypass, Override or VIN Timer. This was the last state of the TDM.
Security Code Programmed	No	The scan tool displays Yes or No. Yes is displayed if a security code is programmed.
Start Disabled	No	The scan tool displays Yes or No. Yes is displayed if the starter is disabled.
Substitution Detection Status	Pass	The scan tool displays Pass or Fail. Pass is displayed if the TDM does not sense a module with incorrect VIN programming.
Tamper Status	Inactive	The scan tool displays Active or Inactive. This is the state of the tamper system.
TDM State	Varies	The scan tool displays Asleep, Wakeup, Normal, Learn Passkey, Tamper, Monitor Key, Fail Pending, Fail Enabled, Lrn Keys Stdby, Learn More Keys, Learn Pending, Auto Learn, Auto. Lrn. Done, No Coded Key, Check Second Key, VIN Check, OnStar, Bypass, Override, or VIN Timer. This was the last state of the TDM.
Telltale Status	Off	The scan tool displays On, Off, Flash or Invalid. This is the state of the security indicator.
Theft Problem	No	The scan tool displays Yes or No. Yes is displayed if there is a theft problem.
Total Keys Learned	Varies	This displays Counts. This is the number of total keys learned by the TDM.
Transponder Key	Present	The scan tool displays Present or Not Present. Present is displayed when a transponder is present. This does not mean that this is a valid or learned transponder, but only that a transponder is present.
Valid Key	Yes	The scan tool displays Yes or No. Yes is displayed if a valid key was used as monitored by the TDM.
Valid VIN	Yes	The scan tool displays Yes or No. Yes is displayed if the VIN is valid.
VIN Learned	Yes	The scan tool displays Yes or No. Yes is displayed if the VIN was learned.
VIN Message Received	Yes	The scan tool displays Yes or No. Yes is displayed if the VIN message is received