Circuit/System Verification
- Vehicle OFF. Connect the vehicle to an AC supply to begin charging
- Vehicle in Service Mode
- Verify that DTC P0D26 is not set and that the vehicle will charge
- If the DTC is set or the vehicle will not charge
Refer to DTC P0D26
- If the DTC is not set
- If the DTC is set or the vehicle will not charge
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing, specific to the DTC(s) set
- If the DTC does not set
- If the DTC sets
- All OK.
NOTE:
Do not have a 12V battery charger connected during the testing.