Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Ball Stud Nut (With ZR2) | |
|
75 N.m (55 lb ft) |
|
90 - 105 degrees |
| Front Lower Control Arm Ball Stud Nut (Without ZR2) | |
|
65 N.m (48 lb ft) |
|
60 - 75 degrees |
| Front Lower Control Arm Nut | 260 N.m (192 lb ft) |
| Front Shock Absorber Lower Bracket Bolt (Without ZR2) | |
|
100 N.m (74 lb ft) |
|
25 - 35 degrees |
| Front Shock Absorber Bolt (With ZR2) | 50 N.m (37 lb ft) |
| Front Shock Absorber Nut (Upper Assembly to Frame) | 58 N.m (43 lb ft) |
| Front Shock Absorber Nut (Upper Mount to Spring) | 38 N.m (28 lb ft) |
| Front Stabilizer Shaft Bolt | 50 N.m (37 lb ft) |
| Front Stabilizer Shaft Link Bolt | 30 N.m (22 lb ft) |
| Front Upper Control Arm Ball Stud Nut | |
|
50 N.m (37 lb ft) |
|
90 - 110 degrees |
| Front Upper Control Arm Nut | 160 N.m (118 lb ft) |
| Front Wheel Bearing and Hub Assembly Bolt | 130 N.m (96 lb ft) |