Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Catalytic Converter Gasket |
| Exhaust Manifold Gasket |
| Exhaust Pipe Seal |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter @Exhaust Manifold Fastener | 50 N.m (37 lb ft) |
| Exhaust Manifold Fastener | |
|
23 N.m (17 lb ft) |
|
27 N.m (20 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Exhaust Control Valve Actuator Fastener | 6 N.m (53 lb in) |
| Exhaust Manifold Heat Shield Fastener | 10 N.m (89 lb in) |
| Exhaust Manifold Stud | 22 N.m (16 lb ft) |
| Exhaust Muffler Fastener | 22 N.m (16 lb ft) |
| Exhaust Pipe Muffler Clamp | 44 N.m (32 lb ft) |
| Exhaust Rear Muffler Hanger Bracket Fastener | 25 N.m (18 lb ft) |
| Intermediate Pipe @Catalytic Converter Fastener | 25 N.m (18 lb ft) |
| Intermediate Pipe Hanger Bracket Assembly Fastener | 22 N.m (16 lb ft) |
| Rear Body Exhaust Heat Shield Fastener | 2.5 N.m (22 lb in) |