Communication Interface Module Replacement

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Communication Interface Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to Battery Disconnect Warning . Preliminary Procedures Disconnect the battery negative cable. Remove driver front seat. Refer to Driver or Passenger Seat Removal and Installation .
1	Communication Interface Module Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 5.5 N.m (49 lb in)
2	Communication Interface Module Procedure Disconnect the electrical connector. For programming and set up procedures, refer to Telematics Communication Interface Control Module Programming and Setup .

Callout

Component Name

WARNING:

Refer to Battery Disconnect Warning .

Preliminary Procedures

Disconnect the battery negative cable.
Remove driver front seat. Refer to Driver or Passenger Seat Removal and Installation .

Communication Interface Module Fastener (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
5.5 N.m (49 lb in)

Communication Interface Module

Procedure

Disconnect the electrical connector.
For programming and set up procedures, refer to Telematics Communication Interface Control Module Programming and Setup .