October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
- Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
Courtesy of GENERAL MOTORS COMPANY
- Inspect the EBCM to BPMV gasket for damage and replace, if necessary.
- Install the EBCM (1) to the BPMV.
- Install the EBCM bolts (1) and tighten in a cross pattern to 3 N.m (27 lb in).
Courtesy of GENERAL MOTORS COMPANY
NOTE:
A new EBCM may not have threaded inserts. Refer to the Electronic Parts Catalog and use new self tapping fasteners to form the threads.
- Connect the EBCM electrical connector.
- Program the EBCM. Refer to Control Module References