Fastener Specifications
WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Pedal Bracket Bolt | 15N.m (11 lb ft) |
| Front Floor Console Armrest Latch Bolt | 2.5N.m (22 lb in) |
| Front Floor Console Bolt@Body Control Module Bracket | 2.5N.m (22 lb in) |
| Front Floor Console Retainer Bolt | 2.5N.m (22 lb in) |
| Heater and Air Conditioning Evaporator and Blower Module Bolt | 9N.m (80 lb in) |
| Heater and Air Conditioning Evaporator and Blower Module Nut | 9N.m (80 lb in) |
| Instrument Panel Airbag Bolt | 9N.m (80 lb in) |
| Instrument Panel Bolt | 2.5N.m (22 lb in) |
| Instrument Panel Compartment Door Opening Frame Bolt | 2.5N.m (22 lb in) |
| Instrument Panel Knee Bolster Bolt | 2N.m (18 lb in) |
| Instrument Panel Knee Bolster Bracket Bolt | 9N.m (80 lb in) |
| Instrument Panel Outer Air Outlet Bolt | 0.67N.m (6 lb in) |
| Instrument Panel Tie Bar Bolt | 22N.m (16 lb ft) |
| Instrument Panel Tie Bar Brace Bolt | 22N.m (16 lb ft) |
| Instrument Panel Upper Trim Pad Bolt | 2.5N.m (22 lb in) |