LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel System- - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 2 >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. GM4091553Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

    Exhaust Gas Recirculation Cooler Temperature Sensor (2) - Install and tighten 42N.m (31 lb ft)

  2. Exhaust Gas Recirculation Cooler Temperature Sensor (2)@Wiring Harness Clip (4) - Install [2x]
  3. Connect the electrical connector. (1)
  4. Three-Way Catalytic Converter Replacement - Install
  5. Intake Manifold Cover Replacement - Install
  6. Battery Negative Cable Disconnection and Connection - Connect
scientia non olet · About LEMON Manuals