Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Human Machine Interface Control Module Bracket (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Human Machine Interface Control Module Bracket Bolt (1)@Human Machine Interface Control Module Bracket (2) - Install and tighten 2.5N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Human Machine Interface Control Module Bracket Bolt (1)@Human Machine Interface Control Module Bracket (2) - Install and tighten 2.5N.m (22 lb in)
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment (2) - Install
Connect the electrical connector.
Install the 5 instrument panel compartment bolt (1) and tighten to 2.5N.m (22 lb in).
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Outer Trim Cover - Right Side (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Airbag - Passenger Side (2) - Install
Connect the electrical connector.
Instrument Panel Lower Airbag Nut (1) - Install and tighten 9N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator (3) - Install
Instrument Panel Lower Trim Panel Insulator Retainer (2) - Install [4x]
Instrument Panel Lower Trim Panel Insulator Bolt (1) - Install and tighten 2.5N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Install the left and right instrument panel fuse block access cover frame (1).
Courtesy of GENERAL MOTORS COMPANY

Install the left and right front floor console extension panel (3).
Front Floor Console Extension Panel Retainer (2) - Install [5x]
Front Floor Console Extension Panel Fastener (1) - Install and tighten 2.5N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Fuse Block Access Hole Cover (1) - Install