LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Programming And Setup) >> Repair Instructions >> K124 Image Processing Module: Programming and Setup (with UKL) >> Replace and Program Image Processing Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Image Processing Module

WARNING: This page is about a different car, the 2021 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Due to continuous improvements, the on screen selections may vary from instructions below.

To program a replacement K12 Image Processing Module, perform the following procedure:

  1. Ignition/Vehicle OFF
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K124 Image Processing Module - Programming and follow the on-screen instructions.
  4. Perform the Vehicle Dynamic Sensor Offset Calibration. Refer to: Vehicle Dynamic Sensor Offset Calibration Vehicle Dynamic Sensor Offset Calibration 
  5. Clear DTCs.
scientia non olet · About LEMON Manuals