Remove & Install or Remove & Replace

TRANSAXLE TYPE

NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Both		1.8		B
One Side		1.0	0.8	B
Combination Procedure: AXLE SHAFT: Replace: NOTE: For Independent Suspension Type Axles, this operation consists of dissassembly and reassembly of the Axle Shaft Assembly and replacement of the Axle Shaft.
Each		0.5		B
Combination Procedure: CONSTANT VELOCITY JOINT: Remove & Replace:
Each		0.4		B
Combination Procedure: CONSTANT VELOCITY JOINT BOOT: Remove & Replace:
Inner &/or Outer,Each Side		0.5		B
Combination Procedure: INTERMEDIATE SHAFT: Remove & Replace:
		0.3		B
Combination Procedure: TRANSAXLE OUTPUT SEAL: Remove & Replace:
Left		0.2		B
Right Side		0.5		B