October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Body Control Module Bracket Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
| Callout |
Component Name |
|
Preliminary Procedures
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
.
- Remove the instrument panel knee bolster assembly. Refer to Instrument Panel Knee Bolster Replacement
.
- Detach the instrument wiring harness junction block from the I/P tie bar.
- Remove the steering column lower support bracket bolt and upper support bracket nuts and lower the steering column to access the body control module bracket nuts. Refer to Steering Column Replacement
.
|
| 1 |
Body Control Module Bracket Nut (Qty: 3)
Tighten
6.5 N.m (58 lb in) |
| 2 |
Body Control Module Bracket
Procedure
After removing the bracket transfer components as necessary. |