LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Spark LS, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Electronic Brake Control Module Replacement

GM3998898Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

Refer to Brake Fluid Irritant Warning .

CAUTION:

Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM.

Preliminary Procedure Remove the EBCM/BPMV assembly from the vehicle. Refer to Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement .
1 Electronic Brake Control Module Bolt (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
3 N.m (27 lb in)
2 Electronic Brake Control Module

Procedure

  1. Separate the EBCM from the BPMV by carefully pulling apart. DO NOT pry the components apart.
  2. If a new EBCM is being installed, program the EBCM. Refer to Control Module References .
3 Brake Pressure Modulator Valve
scientia non olet · About LEMON Manuals