Video Processing Control Module Calibration: Notes
NOTE:
Image will be slightly distorted at all times, the camera(s) lens is a fish-eye lens meant to capture as much as possible.
The calibration procedure allows the Video Processing Control Module to learn new cameras and their positions. The calibration procedure can be initiated by selecting Video Processing Control Module Camera Learn in the scan tool.
Radio Display Prompt Example
NOTE:
Only ONE EL-51372 Camera Calibration Mat is required for calibration.
The left side of the screen will display where the EL-51372 Camera Calibration Mat should be located for each step. The right side of the display is the view from the camera that is being learned during that step.
Mat Position Reference
- Position A is the left front
- Position B is the right front
- Position C is the left rear
- Position D is the right rear