LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Trax Premier, FWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K60 Steering Column Lock Module: Programming and Setup >> Reprogram Steering Column Lock Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Reprogram Steering Column Lock Control Module

NOTE:

Before reprogramming, to ensure that the steering column lock password from the BCM is learned: turn ignition ON and then OFF, close all doors, and wait 5 minutes.

To reprogram an existing steering column lock control module, perform the following procedure:

  1. Ignition ON for 10 seconds, ignition OFF.
  2. Close all doors and wait 5 minutes.
  3. Ignition ON.
  4. Access the Service Programming System (SPS) and follow the on-screen instructions.
  5. On the SPS Supported Controllers screen, select K60 Steering Column Lock Control Module - Programming and follow the on-screen instructions.
  6. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals