Removal Procedure

WARNING:

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Remove the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement .
Clean the wheel speed sensor mounting area on the steering knuckle of any accumulated dirt and debris.
Disconnect the wheel speed sensor electrical connector (1) and release the connector from the frame.
Release the harness clip (2) from the frame.
Release the harness clips (3) from the lower control arm.
Remove any accumulated dirt and debris from the surrounding the wheel speed sensor.
Remove the wheel speed sensor bolt (1).
Remove the wheel speed sensor (1) from the steering knuckle.
Release the harness clip (2) from the steering knuckle and remove the wheel speed sensor.