Side Object Sensing Alert Module Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Rear Bumper Fascia Replacement
1	Side Object Sensing Alert Module Procedure Disconnect the electrical connector. Release the tab retainers and slide the module out of the retaining bracket. Control Module References for programming and setup information, if required.

Callout

Component Name

Preliminary Procedure
Rear Bumper Fascia Replacement

Side Object Sensing Alert Module

Procedure

Disconnect the electrical connector.
Release the tab retainers and slide the module out of the retaining bracket.
Control Module References for programming and setup information, if required.