Windshield Wiper System Module Replacement

WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Open and support the hood assembly. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
1	Windshield Wiper System Module Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Windshield Wiper System Module Procedure Lift the wiper system module from the plenum brackets. Disconnect the electrical connector from the windshield wiper motor. Remove the windshield wiper system module from the plenum.

Callout

Component Name

Preliminary Procedures

Open and support the hood assembly.
Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

Windshield Wiper System Module Bolt (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Windshield Wiper System Module

Procedure

Lift the wiper system module from the plenum brackets.
Disconnect the electrical connector from the windshield wiper motor.
Remove the windshield wiper system module from the plenum.