Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Verify the function: Radio Controls = Inoperative
- If the specified state
Refer to: Symptoms - Entertainment
- Go to next step: If not the specified state
- If the specified state
- Press the following button: S70R Steering Wheel Controls Switch - Right - All
Verify the scan tool parameter: Steering Wheel Control Switches = Displays each of the specified states.
- If not the specified state
Replace the component: S70R Steering Wheel Controls Switch - Right
- Go to next step: If the specified state
- If not the specified state
- Operate the component: S70E Steering Wheel Controls Switch - Radio Presets - Next Preset & Previous Preset
Verify the scan tool parameter: Steering Wheel Control Switches = Displays each of the specified states.
- If not the specified state
Refer to: Circuit/System Testing/S70E Steering Wheel Controls Switch - Radio Presets
- If not the specified state
- Operate the component: S70F Steering Wheel Controls Switch - Radio Volume - Volume Down Button & Volume Up Button
Verify the scan tool parameter: Steering Wheel Control Switches = Displays each of the specified states.
- If not the specified state
Refer to: Circuit/System Testing/S70F Steering Wheel Controls Switch - Radio Volume
- Go to next step: If the specified state
- If not the specified state
- All OK.