Window Motor Programming - Express Function: Notes
A window motor that has not been normalized may no longer perform the express up functions or may not index up when the door is closed, this may occur during the following conditions:
- When a window motor has been disconnected or replaced
- When a door harness has been disconnected
When the battery has been disconnected or replaced, all window motors may no longer perform the express up functions
NOTE:
When DTC B1956 55, B1957 55, B1958 55, B1959 55 are set, the following warnings will be displayed on the driver information center:
- Open, then Close Driver Window
- Open, then Close Passenger Window
These warnings will clear once the windows have been "Normalized" and the respective DTC will clear.