Installation Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Lighting Control Module (1) - Install
- Secure the retaining tab.
- Connect the electrical connectors.
Position the front floor panel carpet in place.
- Connect the electrical connectors.
- Instrument Panel Lower Trim Panel Insulator (1) - Install
- Install the front edge of the front floor console extension panel into the instrument panel lower trim panel insulator (1).
- CAUTION:
Refer to Fastener Caution .
Instrument Panel Insulator Bolt (2) - Install and tighten [4x] - Fastener Specifications
Unlock and lower the body control module bracket (2).
- Connect the electrical connectors.
- Close and lock the body control module bracket (2) into the instrument panel lower trim panel insulator.
- Body Control Module Bracket Bolt (1) - Install and tighten - Fastener Specifications
- Perform the necessary programming and setup procedure:Control Module References
- Clear DTCs