Installation Procedure

WARNING: This page is about a different car, the 2021 Chevrolet Tahoe and 2021 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Remote Function Actuator Module (1) - Install
Secure the retaining tab.
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Feed the rear seat belt opening bezel and rear seat belt through the body lock upper trim panel.

Body Lock Pillar Upper Trim Panel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Quarter Window Trim Finish Panel Bolt (2) - Install and tighten - Fastener Specifications
Quarter Window Trim Finish Panel Bolt Cap (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Rear Seat Belt Opening Bezel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Rear Seat Belt Retractor Anchor Plate Bolt (2) - Install and tighten - Fastener Specifications
Rear Seat Belt Retractor Sleeve (1) - Reposition
Enable the SIR System. SIR Disabling and Enabling