Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Verify DTC B1015 is not set.
- If the DTC is set
- Program the control module: Control module that has set the DTC
- Ignition - On / Vehicle - In Service Mode
- Verify DTC B1015 is not set. If the DTC is set
- If the DTC is set
Replace the component for which the DTC was set.
- Go to next step: If the DTC is not set
- If the DTC is set
- All OK.
- Go to next step: If the DTC is not set
- All OK.