Installation Procedure
Keyless Entry Control Module (1) - Install
Keyless Entry Control Module Bracket (2) - Install
- Keyless Entry Control Module Bracket Bolt (1) - Install and tighten [3x] - Fastener Specifications
Retaining Clip (2) - Install
- Electrical Connector (1) - Connect
Instrument Cluster (1) - Install
Connect the electrical connector.
- Instrument Cluster Bolt (1) - Install and tighten [4x] - Fastener Specifications
Instrument Panel Cluster Trim Plate (1) - Install
Instrument Panel Cluster Trim Plate Bolt (1) - Install and tighten [5x] - Fastener Specifications
Connect the electrical connectors.
- Instrument Panel Accessory Center Trim Plate (1) - Install
Instrument Panel Accessory Center Trim Plate Bolt (1) - Install and tighten [2x] - Fastener Specifications
Instrument Panel Compartment (1) - Install
Instrument Panel Compartment Bolt (1) - Install and tighten [4x] - Fastener Specifications
Instrument Panel Compartment Bolt (1) - Install and tighten [2x] - Fastener Specifications
Connect the electrical connector.
- Instrument Panel Lower Airbag - Passenger Side (2) - Install
- Instrument Panel Lower Airbag Nut (1) - Install and tighten [2x] - Fastener Specifications
Instrument Panel Outer Trim Cover - Right Side (1) - Install
Instrument Panel Accessory Center Trim Plate Bolt (1) - Install and tighten [2x] - Fastener Specifications
Connect the electrical connector.
- Instrument Panel Steering Column Upper Trim Cover (1) - Install
Secure the instrument panel steering column upper trim cover (1) to the instrument panel steering column lower trim cover.
- Enable the SIR System. SIR Disabling and Enabling
- Perform the necessary programming and setup procedure:K84 Keyless Entry Control Module: Programming and Setup