Electronic Brake Control Module Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
WARNING: Brake Fluid Irritant Warning CAUTION: Brake Fluid Effects on Paint and Electrical Components Caution CAUTION: Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM. Preliminary Procedure Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement
1	Electronic Brake Control Module Bolt [4x] CAUTION: Fastener Caution Tighten 3 N.m (27 lb in)
2	Electronic Brake Control Module Procedure Program the electronic brake control module. Control Module References Bleed the brake system. Hydraulic Brake System Bleeding

Callout

Component Name

WARNING:

Brake Fluid Irritant Warning

CAUTION:

Brake Fluid Effects on Paint and Electrical Components Caution

CAUTION:

Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM.

Preliminary Procedure Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement

Electronic Brake Control Module Bolt [4x]

CAUTION:

Fastener Caution

Tighten
3 N.m (27 lb in)

Electronic Brake Control Module

Procedure

Program the electronic brake control module. Control Module References
Bleed the brake system. Hydraulic Brake System Bleeding