Unsuccessful Programming Recovery
WARNING: This page is about a different car, the 2023 GMC Savana 3500, 2023 GMC Savana 2500, 2023 Chevrolet Express 3500, and 2023 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
In the event of an interrupted or unsuccessful programming event, perform the following steps:
- Ignition ON. Ensure the control module, DLC and programming tool connections are secure and the SPS software is up to date.
- Verify the control module can be reprogrammed.
- If the control module cannot be reprogrammed
- Ignition OFF for one minute, ignition ON.
- Verify the control module can be reprogrammed.
- If the control module cannot be reprogrammed, replace the control module.
- Go to next step: If the control module can be reprogrammed.
- All OK.
- Go to next step: If the control module can be reprogrammed
- All OK.