Replace and Program Control Module or Reprogram Control Module
WARNING: This page is about a different car, the 2023 GMC Savana 3500, 2023 GMC Savana 2500, 2023 Chevrolet Express 3500, and 2023 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
To program a replacement or an existing control module, perform the following procedure:
- Access the Service Programming System (SPS) and follow the on-screen instructions.
- In the SPS Supported Controllers screen, select K73 Telematics Communication Interface Control Module Programming and Service Activation and follow the on-screen instructions.
- At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
- Press the OnStar® Blue Button to call OnStar® and have the system activated. If the customer refused OnStar® services (terms and conditions) and the vehicle is equipped with RPO VV4 have the OnStar® consultant turn off the WiFi demo message that occurs after every ignition on event.