LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2023 >> Bolt EV >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> K114A Hybrid/EV Powertrain Control Module 1: Programming and Setup >> Programming an Existing or New Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming an Existing or New Control Module

NOTE:

Before programming please ensure the 12V battery is fully charged and close the hood. Programming with the hood open could result in a no-start condition. If a no-start condition occurs, please close the hood and consult Electronic Service Information regarding "Clear Secured High Voltage DTCs".

To program an existing or new control module, perform the following procedure:

  1. Install the special tool: EL-49642 SPS Programming Support Tool
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K114A Hybrid/Electric Vehicle Powertrain Control Module 1 - Programming and follow the on-screen instructions.
  4. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals