Off-Board Charger Control Module Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures WARNING: Battery Disconnect Warning Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection Remove the driver seat. Front Seat Removal and Installation (Manual)Front Seat Removal and Installation (Power)
1	Power Line Communication Module Nut CAUTION: Fastener Caution Tighten 9 N.m (80 lb in)
2	Power Line Communication Module Procedure To access the module, open up the floor carpet along the cut line. Disconnect the electrical connectors. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection For programming and set up, refer to Control Module References .

Callout

Component Name

Preliminary Procedures

WARNING:

Power Line Communication Module Nut

CAUTION:

Tighten
9 N.m (80 lb in)

Power Line Communication Module

Procedure

To access the module, open up the floor carpet along the cut line.
Disconnect the electrical connectors.
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
For programming and set up, refer to Control Module References .