Power Transfer Unit Intermediate Drive Shaft Components Removal

Fig 1: Exploded View Of Power Transfer Unit Intermediate Drive Shaft Removal Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Power Transfer Unit Intermediate Drive Shaft Clip Procedure Remove and DISCARD the retainer.
2	Power Transfer Unit Half Shaft Seal - O-Ring Procedure Remove and DISCARD the O-ring seal.
3	Power Transfer Unit Intermediate Drive Shaft Seal Procedure Remove seal with a thin flat putty knife or equivalent. Inserting the blade of the tool between the outside diameter of the seal and the extension housing surface.
4	Power Transfer Unit Intermediate Drive Shaft Bearing Retainer CAUTION: Do not nick, scratch or damage the sealing surface. The sealing surface is a machined surface. Damage to the machined surface can cause leakage.
5	Power Transfer Unit Intermediate Drive Shaft Bearing Retaining Ring [2x]
6	Power Transfer Unit Intermediate Drive Shaft Bearing Procedure Use a press and press blocks to remove the bearing from the power transfer unit intermediate drive shaft.
7	Power Transfer Unit Intermediate Drive Shaft