Circuit/System Verification

Note: Verify the correct replacement part number.

1. Ignition - On/Vehicle - In Service Mode
2. Verify DTC B3105 is not set.
   • If the DTC is set 
   1. Perform all necessary programming and setup procedures for the control module: Remote Control Door Lock Receiver@K9 Body Control Module
   2. Verify the DTC does not set.
      • If the DTC sets - Replace the component: Keyless Entry Transmitters
      • Go to next step: If the DTC is not set
   3. All OK.
   • Go to next step: If the DTC is not set 
3. All OK.