LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2024 >> Silverado EV RST >> Repair and Diagnosis >> Electrical >> Body Electrical >> Plug-In Charging >> Repair Instructions >> Battery Charger Replacement - Battery Charger Control Module 2 >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. GM6302611Courtesy of GENERAL MOTORS COMPANY

    Battery Charger (1) - Install

  2. GM6302609Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Battery Charger Bracket (3) - Move into position

    3. CAUTION:

    Refer to Fastener Caution .

  3. Drive Motor Battery Charger Ground Bolt (2) - Tighten [2x] - Fastener Specifications 
  4. Drive Motor Battery Charger Bolt (1) - Install and tighten [3x] - Fastener Specifications 
  5. GM6302608Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Battery Charger Bolt (1) - Install and tighten [4x] - Fastener Specifications 

  6. GM6302474Courtesy of GENERAL MOTORS COMPANY

    Connect the high voltage electrical connector. (3) High Voltage Connectors

  7. Drive Motor Battery Charger Inlet Hose (2) @ Battery Charger - Connect
  8. Retainer (1) - Engage
  9. GM6302473Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector. (3)

  10. Connect the high voltage electrical connector. (2) High Voltage Connectors
  11. Retainer (1) - Connect
  12. GM6302472Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Power Distribution Control Module Hose (2) @ Battery Charger - Connect

  13. Retainer (1) - Engage
  14. Rear Suspension Cradle - Install - Rear Suspension Cradle Removal and Installation (FE2) , or Rear Suspension Cradle Removal and Installation (F47)
scientia non olet · About LEMON Manuals